A diluted on ethylene glycol based coolant for use in engines. It employs Inorganic Acid Technology (IAT) inhibitor and is nitrite, amine and phosphate (NAP) free and includes borate and silicate. This sophisticated technology eliminates the formation of silicate gel which is observed with inferior products. It offers total and permanent protection of the cooling system and a life span of 2-3 years for passenger cars and professional applications.Ready to use solution.
APPLICATIONS
Formulated for use in all engines including those constructed from aluminium alloys. Best choice for older cooling systems that have copper/brass radiators and heater cores, especially for the lead solder used in them.Suitable for cooling circuits of the open or closed type (vehicles and heating) with a protection against freezing until -36deg;C. This solution is ready to use and can be used during the whole year.
Applications
Anti-freeze properties: Very good low/high temperature performance.
Anti-corrosion properties: Adequate corrosion protection.
Performance Levels | |||
AFNOR | NF R 15-601 | MAN | 324 NF |
ASTM | D3306 | MB | 325.0 |
ASTM | D4985 | MTU | MTL 5048 |
BMW | N600.69.0 | POLISH | PN-C-40007 |
BS | 6580 | STANDARD |
|
DAVID BROWN | DBL-7700 | SAAB | 690 1599 |
FIAT | 55523/1 | SAE | J1034 |
FORD | SSM-97B9102A | SCANIA | S28917.3 |
GM | B 0400240 | SCANIA | TB 145 |
GME | 13.368 | VW | TL 774-C |
Physical Characteristic |
|
|
Test | Unit | Average results |
PH |
| 8.15 |
Density at 20deg;C | g/ml | 1.069 |
Colour |
| BLUE |
Freezing point (refracto) | deg;C | -36 |
Water content | ％wt/ | 50 |
